Fix USB Ports not working on Windows 10

Have you recently updated your Windows to Windows 10 and now your USB port isn’t working? The USB port not working windows 7 is quite a common error where it seems that the USB controller is in a failed state and is not working. In this case, none of the USB drivers work be it USB keyboard, USB mouse Printer or pen drive. Hence Windows 10 USB not recognized error is likely to come. This USB port not recognizing or USB Ports not working the device at times becomes very frustrating.

Causes of Windows 10 USB not recognized error-

There are many causes that lead to this error, but few of them because of which the USB Ports are not working are mentioned here-

  • Power Supply issues
  • Faulty Device
  • Power Management settings
  • Outdated or corrupted USB drivers
  • Damaged USB Ports

Also Read: Fix Memory Management BSOD Error on Windows 10

There are a number of ways to try to fix your USB port. The very first thing you’re going to want to do is to look at the USB port for physical damage. The USB ports cannot operate properly may be a result of the USB devices driver or the related drivers like the motherboard and chipset drivers. Also, ensure the ports are free of dust. Sometimes this may lead to USB Ports not working issue on your Windows 10.

Without it, Windows won’t be in a position to recognize printer, scanner, camera and so forth. If Windows 10 does not arrive with any message concerning the detection of a new USB device, you may want to look at the USB cable and attempt to replace it with a different one. You are able to refer to the Windows update options provided by Microsoft.

Solved: USB Ports not working in Windows 10 after updating

After you restart the system, it is going to be made to reinstall the main hubs. The previous thing which you would like to do is to reinstall the entire system and to reset everything from scratch. The computer operating system was upgraded.

Methods to fix error “Windows 10 USB not recognized.”

So without wasting any further time lets jump to the solutions.

Method 1- Scan for Hardware Changes and Troubleshooter-

Use Device Manager to perform this method of scanning for hardware changes. After your computer begins scanning it will recognize the USB device that is connected to the USB port for use.

Step 1- Click on the Start button. Then click Run.

Step 2- Type devmgmt.msc in the run dialog box.

Step 3- Click OK.  Then open Device Manager.

Step 4- In Device Manager, click your computer.

Step 5- Now click Action, and then hit Scan for hardware changes.

Step 6- Check the USB device to see whether it is working.

If it does not helps switch to other methods.

Method 2- Check for Faulty device

It may happen that the device which you are trying to use is faulty and therefore is not recognized by Windows. So to verify that just plug your USB device in another working PC and see if it works. If it is working, then there is a problem with a USB port.

Method 3- Check for Power Supply

Your laptop’s power supply is delivered to your USB ports. In case if it fails to do this properly, then the devices plugged into these USB ports may not work.

Step 1- Unplug the power supply and charger from your laptop.

Step 2- Now restart your system.

Step 3- Connect your USB device to the laptop again.

Step 4- Finally plug the power supply back in and look for the error.

Method 4- Disable and re-enable the USB controller

This method will let the controllers recover the USB port from the unresponsive condition.

Step 1- Open Device Manager.

Step 2- Find the Universal Serial Bus Controllers > expand.

Step 3 -Find USB Root Hub device in the list.

Step 4- Go to Power Management.

Step 5- Un-check the Allow the computer to turn off this device to save power > OK.

Step 6- Repeat steps 3-5 for each USB Root Hub device.

Method 5- Update Drivers for USB controllers

Step 1- Press Windows Key + R  to open Run and type devmgmt.msc.

Step 2-  Go to Device Manager > expand Universal Serial Bus controllers.

Step 3- Right-click on the first USB controller > Update Driver Software.

Step 4- Select Search automatically for updated driver software. Click Next.

Step 5-Repeat the above step for each of the USB controller present

Step 6- Reboot your PC.

That’s it! Once you follow any of the above methods in the sequence of steps mentioned, then I assure you that you will no longer face the USB ports not working issue. So take your time and refer to any of these methods that are gonna work.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.