Fix Automatic Repair Couldn’t Repair your PC

Windows 10 is indeed a complex Operating System. And with each upgrade that it is releasing, it is trying to offer its users the best of the features. Windows 10, the latest version by Microsoft also tries to overcome all the shortcomings and limitations of the previous versions. But you can still experience some errors that are common among all the Windows OS. The Windows Automatic Repair is a built-in troubleshooter that helps to fix various issues automatically, mainly related to boot failures. This Automatic Repair feature of Windows too sometimes fails to work. And so today we are sharing the top effective ways to fix Automatic Repair Couldn’t repair your PC issue. Boot failure can happen anytime and so it is important that Automatic repair system works properly. So if you too are facing such an issue, then keep your reading spectacles on.

Also Read: Windows 10 Password Reset Without Disk

Windows Automatic Repair Tool

The Windows Automatic Repair system is a built-in feature of windows that is meant to fix the boot failure. When the Windows 10 system fails to boot, the Automatic Repair feature fixes the errors that prevent the Windows from running properly. The repair tool fixes various problems automatically, but sometimes it might happen that the tool fails to work. One of the major reason behind the interference in the smooth running of the tool is corrupted or missing files from the installation file folder of the OS. Due to this, you might fail to get into the Safe Mode.

How to Fix Automatic Repair Couldn’t Repair your PC?

If you too get stuck in such a situation, then the methods given below will be helpful in troubleshooting.

Method 1- Fix Corrupted File System using Diskpart

Step 1- Open Command Prompt by pressing the Windows ion key+ X. choose Command Prompt from the pop-up list.

Step 2: Now in the command window type diskpart. Then write the following commands-

DISKPART> Select disk 1

DISKPART> select partition 1

DISKPART> active

DISKPART> extend filesystem

DISKPART> exit

Step 3: Then follow the method with the given commands

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

Step 4: Now restart your system and check if the issue persists.

Method 2- Disable Early Launch Anti-Malware Protection to fix Automatic Repair Tool

The Early Launch anti-Malware Protection has bugged many users, and so by disabling it, you can fix Automatic Repair couldn’t repair your PC issue easily. Follow the steps given below to disable it.

Step 1: Click on the Power option on your Windows home screen. Now enter the Boot options by holding the Shift key and clicking on the Restart option at the same time.

Step 2: In the Boot menu, click on Troubleshoot, followed by Advanced options and then Startup settings.

Step 3: You system will restart and display a list of options from which you can choose.

Step 4: Restart your system by clicking on the option disable early launch anti-malware protection option.

Method 3- Use Check Disk Utility to Fix Windows Automatic Repair Tool

You can use the disk utility to fix the issue with Windows Automatic Repair tool. Follow the steps given to resolve the issue.

Step 1: Press Windows icon key+ X, and then open Command Prompt. In the command, windows type the following command-

Chkdsk/f/r/C: (C, in this case, is the drive in which Windows is installed)

Step 2: Press Enter and then check if the issue is resolved.

Method 4- Delete the Corrupt File

It is possible that some of the files on your system might be corrupt thus leading to various problems which Automatic Repair Tool too cannot deal with.

Step 1: Enter the following command in the CMD window.

cd C:\Windows\System32\Logfiles\Srt 

Step 2: Then enter the following command

SrtTrail.txt

Step 3: after this, the file will open, and you will observe a message like this.

Boot critical file c:\windows\system32\drivers\tmel.sys is corrupt

Step 4: Now use the following command to delete the file that is corrupted-

cd c:\windows\system32\drivers

Step 5: Then enter the given command

del sys

Step 6: Restart your system and check if Automatic Repair tool is working properly.

Method 5- Disable Automatic Startup Repair

A faulty Automatic Repair tool might be because this feature is turned on without any reason. And thus you cannot use your computer properly. So one more way to fix the issue related to Automatic Repair tool is by disabling it.

Step 1: Enter the Boot options by clicking on the Power button, then press the Shift key and click on Restart option.

Step 2: Then follow the given path- Troubleshoot> Advanced Options> Startup Settings

Step 3: Then in the command prompt window type the following command and run it.

bcdedit /set {default} recovery enabled No

Step 4: Restart your system and check if the changes made are working or not.

These were the top 5 methods that will help you fix Automatic Repair Tool couldn’t repair your PC. There are a lot of other methods that can also help you resolve the issue. Do let us know if you feel some other workaround suits you better.

1 thought on “Fix Automatic Repair Couldn’t Repair your PC”

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.