Arris Router Login – Default Username & Password

Arris routers are popular nowadays but like all routers, you need to know how to configure them if you ever run into problems. Have you noticed a drop in Internet speed? Do you suspect that your neighbor’s stealing your WiFi? Do you want to change your WiFi name to “Hogwarts Great Hall WiFi“? whatever the reason may be, to configure your WiFi, you need to get past the Arris router login gateway.

In this article, I’m going to include instructions on how you can log in to your Arris router. These settings can help you beef up your security and even solve some Internet issues. Let’s get started.

Arris Router Login Guide

Logging into the Arris router is fairly simple and is similar to logging in to most popular routers. Just follow the steps below.

1. Make Sure Your Device is Connected

You don’t need to worry about whether you need to use a computer or a phone. Any device with a working WiFi or an ethernet port would be enough. Just make sure that you are connected to your WiFi and not to someone else’s. On Windows, simply click on the WiFi icon in the system tray, and on Mac, click the WiFi icon on the menu bar to check this. On Android, check the quick settings panel and check the control center on iOS.

If you don’t have the WiFi password, just connect the Ethernet cable to your laptop or desktop and you can bypass the password. If you have a new router, the WiFi name (SSID) and password can be found printed on the router.

2. Enter the Arris Router Gateway

For this, you need to open a browser on your connected device and enter the default IP address 192.168.01 in your address box. You will be taken to the Arris router gateway as soon as you press enter.

Some router models can have different default IP address. If 192.168.01 does not work, then you can try


3. Enter the Log In Credentials

Enter the username and password. The default username and password will be admin and password respectively. The username and password are case sensitive. The default username and password will remain the same across all modems.

You are now logged in to your Arris router and you will be able to configure it using its web interface. You can change the username and password or reset your router if you are facing any issues.

How To Change the Username and Password?

After completing the Arris router login page setup you might want to change the username and password, log into the Arris router using the steps mentioned above and follow these instructions:

  1. Make sure that you selected the Basic Setup tab.
  2. Under the Wireless 2.4 GHz header, change the Wireless Network Name(SSID) to whatever you like. Enter the new password in the Pre-Shared Key box.
  3. Under the Wireless 5 GHz header, change the Wireless Network Name(SSID) to the one used in step 2. Enter the step 2 password in the Pre-Shared Key box.
  4. Click Apply at the bottom of the page.

How To Reset Your Arris Router?

If you made a mistake configuring your Arris router login page or if your router is causing you problems, then you can reset the router to its factory settings. To do that, you can press the reset button behind the router with a paper clip or you can do it through the web interface. To do the latter, just follow these steps.

  1. Log in to the web interface.
  2. Click on the Utilities tab.
  3. Click Factory Defaults and then click OK. Your router will be reset.

Final Take

If you wanted to log into the Arris router and change its username and password or reset it, then this is all you need to know. I hope that this article was helpful. if you have any doubts about the instructions or any other suggestions, please let me know in the comments section down below.